[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
4000S A/C wiring
I recently bought an '85 4000S with a non-working air conditioner. The
unit did absolutely nothing, but I soon found out why. While I was
installing the stereo, I noticed that the plug to the A/C switch had been
disconnected and two of the three wires connected to it had been pulled
off. I managed to find three likely candidates: 20 ga. BK/BL (dead, not
ground), 16 ga. BL/BK (Hot) from the blower switch, and 20 ga. BR/Red dot
(grounded). The Haynes manual doesn't cover this A/C and my
experimentation has only yielded a blown 30A fuse. If any one knows what
wires are supposed to be hooked up to the switch, please let me know.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]