[200q20v] Lowering Springs?

Bernie Benz b.m.benz at prodigy.net
Sun Apr 29 23:26:16 EDT 2001

IMO, no one should consider changing the ride height of his car without a
complete understanding of the bump steer characteristics of the vehicle, and
the resultant associated handling problems!  Yet, most contributors to this
and other trivial Audi lists are avocates of both higher rate, shorter
springs and "stiffer" shocks, the constant "feels so good, thinner wallet"
fad, and all this in spite of wives and friends complaints (know the
difference?) about the resultant SUV ride characteristics.

Color is king!  Do you like yellow shocks with red springs, or are two
orange striped black springs with purple shocks the better combo,  what is
the consensus?


> From: C1J1Miller at aol.com
> Date: Sun, 29 Apr 2001 22:25:39 EDT
> To: brettd at speakeasy.net, t44tq at mindspring.com, 200q20v at audifans.com,
> quattro at audifans.com, s-car-list at yahoogroups.com
> Subject: Re: [200q20v] Lowering Springs?
> In a message dated 4/29/01 12:26:28 PM Eastern Daylight Time,
> brettd at speakeasy.net writes:
>>> Finally, does anyone know if '92 UrS4 springs will work on
>>> a '91 200q w/o raising ride height? If they do and someone has
>>> BTDT, please let me know.
>> No.  These transformed Rob Winchell's car into what he called "the
>> 200q20v allroad" ; the S4 is much heavier than the 200q20v.
>> Brett
> The '92 is about 3850# versus the '91 at 3650#, probably fairly evenly split
> up front/rear.  It is also a bit lower and stiffer than the '91, so using
> front/rear springs from the '92 S4 in the '91 would likely have a slight drop
> in height, and an increase in stiffness.  Rob used springs off an S6, which
> was higher stock ride height, plus heavier.
> I'm currently considering what to complete for my own suspension mods on my
> '91 200q20v sedan.  I've been running stock front springs/boges, and rear '92
> S4 springs/boges.  My options are:
> Eibach springs for the '91 200q20v, front and rear;
> Eibach front springs, with '92 S4 rear springs;
> Eibach front springs, with H&R V8 rear springs;
> Rear springs/inserts can be easily swapped, so I'll likely try a few
> combinations to evaluate what I prefer.
> For strut inserts, I'm likely using a set of Konis I picked up cheap.
> I believe you can also install slightly different height rubber spring mounts
> up front to help corner balance the car/adjust ride height.
> Chris Miller, Windham NH, c1j1miller at aol.com
> '91 200q20v ==>  http://members.aol.com/c1j1miller/welcome.html
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list