91 200q20v, c-arm bushing replacement

Bernie Benz b.benz at charter.net
Sat May 7 10:07:47 EDT 2005

Thanks for the improved description of your bushings of interest.  Nothing
wrong with just replacing all the bushings everywhere, needing so or not, if
you have the wallet and interest to do so.  One overall comment would be
don't tighten any bushing bolt without having the suspension at static ride


> From: Rbade12 at aol.com
> Date: Sat, 7 May 2005 09:34:36 EDT
> To: 200q20v at audifans.com
> Subject: 91 200q20v, c-arm bushing replacement
> Hey folks,
> My apoligies, I did not properly define the parts I plan on replacing. I
> will be replacing the front inner c-arm bushings and what are, more
> accurately 
> called, sway bar end bushings. The sway bar bushing I ask  about would be
> called, perhaps, the inner sway bar bushing.
> I have the inner c-arm bushings and the sway bar  end bushings in my
> possession. I plan on purchasing the inner sway bar  bushings soon.
> So, I'm going to pull the front c-arms and replace the rubber parts  that
> attach to it. It appears to be a pretty straight forward job, just looking
> for 
> any hints. I'll replace the inner sway bar bushings as soon as I get input
> regarding them and decide what to buy
> Thanks, Bob
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v

More information about the 200q20v mailing list