Big Brakes on a Ur-Q?
Big Brake Parts
bigbrakeparts at gmail.com
Sun May 3 12:26:19 PDT 2009
A8 - 59mm
S4 - 46.2mm
Regarding the track usage I prefer wilwood calipers because of much
firmer pedal feel compare to brembo (stock master cylinder).
May 3, 2009, в 7:58, "Andrew Dickinson" <amdickinson at rogers.com>
> I am hoping to get out on some track days at Mosport eventually. I am
> just tired of the old rotors warping. I am hoping that the larger
> braking surface will mean less chance of warping due to the larger
> Yes. I have the 323x30 S8 hats. Can you measure the 200 S4 hat for
> please? Ideally it should be very close to the 5000/Ur rotor.
> -----Original Message-----
> From: Big Brake Parts [mailto:bigbrakeparts at gmail.com]
> Sent: May 2, 2009 10:00 PM
> To: Andrew Dickinson
> Cc: <quattro at audifans.com>
> Subject: Re: Big Brakes on a Ur-Q?
> What S8 rotor are talking about? 323x30? If yes then try 2000 S4 8D0
> 615 301M rotor. The overall height is much less then A8 4D0 615 301M
> part. I have both in my garage and can measure if needed.
> Just wondering why you need big brakes? Use the car on the track?
> May 2, 2009, в 7:39, "Andrew Dickinson" <amdickinson at rogers.com>
>> Hi all:
>> I have managed to pull together all the parts I thought I required
>> for a
>> big Brembo set up. Unfortunately the S8 rotors aren't even close to
>> fitting. I have the RS2 carrier/caliper adapter brackets and a set
>> 996 Brembos calipers with the right adaptive SS Lines.
>> Does anyone have any thoughts as to another 5x112 bolt pattern rotor
>> that I can use? The S8 hat stands proud by a centimeter or more I
>> guess. It rubs against the lower strut housing/hub assy.
>> Failing that is it possible to cut and weld the lower assy to clear
>> large S8 rotor? I think this wil still result tin the rotor sitting
>> far back afterwards.
>> Then there is the possibility of wheel spacers... But behind the
>> Does anyone have any thoughts on this?
>> I contacted 034 and their only suggestion was an A8 hat but I suspect
>> the rotor/hub offset issue will be the same.
>> Any ideas or suggestions are appreciated.
>> quattro mailing list http://www.audifans.com/mailman/listinfo/quattro
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.238 / Virus Database: 270.12.13/2091 - Release Date:
> 05/01/09 17:52:00
More information about the quattro