[s-cars] Tuning me...
mlped at qwest.net
Mon Jan 13 09:01:07 EST 2003
This is a multi-part message in MIME format.
[ Picked text/plain from multipart/alternative ]
Sorry Rod, I was under the impression the correction was computed by
multiplying wheel numbers by the transmission correction factor,
i.e. 376.7 * 1.25% tcf = @ 470.9
Shows you what little I know. A second question I've wondered about is do
you know whether the programming on the dyno that generates the numbers also
included an adjustment for altitude & temperature?
From: s4audinut at aol.com [mailto:s4audinut at aol.com]
Sent: Monday, January 13, 2003 4:56 AM
To: Audi5zylinderturbotechnik at yahoogroups.com;
Audi20V_Kruemmer at yahoogroups.com; joern.amundsen at online.no;
tommy.arnberg at nokia.com
Cc: s-car-list at egroups.com; s-car-list at audifans.com; Aelreds at aol.com;
andyeuro at mindspring.com; UrS-technical at yahoogroups.com;
TJMMOTORSPORT at aol.com
Subject: [UrS-technical] Re: [Audi5zylinderturbotechnik] RE:
[Audi20V_Kruemmer] Re: [s-cars] Tuning me...
In a message dated 01/13/2003 12:45:56 AM Eastern Standard Time,
mlped at qwest.net writes:
I can read the 385.2 ft/lbs &376.7 bhp at the wheels with the high
tank, but I can't follow how you've translated those numbers to 514
or 502.4 bhp with a 25% tcf?
x*4 = # given
will try to get all the stuff
To unsubscribe from this group, send an email to:
s-technical-unsubscribe at yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
More information about the S-car-list