[urq] European Car project 4000Q back issues anyone?

Eric Renneisen racingiron at comcast.net
Fri Dec 22 07:35:31 EST 2006

The 4KQ compressor is a different type and location than the urq.  It's
a full-size York (mounted on right side) whereas the urq has a mini-York
on the left.  Any adapter bracket will need to accommodate the mini-York
three-bolt mount pattern (the big one uses four).  Also, the location of
the urq compressor leaves very little room between the rear of the
compressor to the condenser, so the replacement compressor can't be too

I'd like to do this same conversion on my urq soon, so any BTDT advice
would be much appreciated.

Eric R.
'86 urq
'93 urS

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
Behalf Of eric harten
Sent: Wednesday, December 20, 2006 11:29 PM
To: urq; quattro
Subject: [urq] European Car project 4000Q back issues anyone?

I am getting ready to put an ICE ac conversion kit in my UrQ (the old
R12 "Tower of Power" system was ripped out years ago).  Someone had
mentioned that back in in 96? European Car magazine installed one of
these kits on their Project 4000Q.  Does anyone have a copy of this
article?  I would love some BTDT on this AC conversion project.  The kit
comes with a new rotary compressor, bracket and lines.  I am also
replcing the condenser, dryer and expansion valve.  The lack of ACin
Hawii is getting to me.  Thanks

Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
Have an urq question?  Check the Audifans Knowledgebase!
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!

More information about the urq mailing list