[urq] clutch master cylinder

Louis-Alain Richard 5145727795 at bell.net
Mon Oct 15 11:20:52 PDT 2012

I guess you have a problem similar to mine.

The pushrod is attached to the pedal via a u-shaped thingy (a clevis ?) with
a steel pin an a circlip at the pedal. On my car, that pin enlarged the hole
in the pedal so the adjustment on the rod was too short. I had to fabricate
a bushing to recenter the steel pin in the ovalized hole. I used a steel nut
with a flange that I machined on my bench grinder to conform to the ovalized
hole of the pedal. I drilled the threads to the steel pin diameter. Press
fitted it in the pedal, it is still on the car today. Solid clutch pedal
with no play at all.

(ETKA pages to follow for you to see.)

> -----Message d'origine-----
> De : urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] De la part
> de Chris Miller
> Envoyé : 15 octobre 2012 7:56
> À : urq at audifans.com
> Objet : [urq] clutch master cylinder
> When I picked up my project urq, it didn't have the clutch master cylinder
> installed.  Bought a new one, installed it along with a firewall brace.
> Pushrod doesn't seem to adjust long enough to reach pedal.  Also I need to
> figure out how the pushrod attaches to the pedal; anyone replaced theirs?
> Chris
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/

More information about the urq mailing list