[V8] O2 R&R

Michele_Deltergo at KeyBank.com Michele_Deltergo at KeyBank.com
Wed Aug 16 08:47:47 EDT 2006

Oh yeah, tried that torch, no avail.  I have reason to believe the O2 has 
had 16 years to become one with the collector.  There is not enough room 
to get an 02 socket on the sensor then attach the drive handle.  I may go 
the deep socket route if I can find a deep one shallower than the O2 
socket, or may try one of those crow foot O2 sockets.  One O2 socket I 
have only cover 4 of the 6 corners and it will give before THIS O2 will 
come out.  Trying a better socket now with more soaking etc.  Fingers 


Small propane torch. That makes it so much easier, and chances of leaving 
threads in the downpipe become much less. You want to heat the downpipe, 
the O2. I usually leave it sitting under there for a minute or so. That 
it expands away from the O2 and it should come out fairly easily. They 
for me, anyhow.

Tony Hoffman
----- Original Message ----- 
From: "Mike Del Tergo" <mdeltergo at hotmail.com>
To: <v8 at audifans.com>
Sent: Tuesday, August 15, 2006 4:55 PM
Subject: [V8] O2 R&R

This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114

If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the

More information about the V8 mailing list