[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: O2 wrench size info needed...

> While skimming a recent JCWhitney catalog, I saw a special socket designed
> for just this purpose.  It is a deep socket with a fairly wide slot up the
> side through which the wires fit.

On the cars where the O2 sensor is mounted on the exhaust manifold, this may
come in handy -- I've got one in the toolbox -- but the later cars that have
the sensor on the downpipe or as part of the cat are better served by a 22mm
wrench.  BTDT, too many times...

     _             _             
    / l       l o l  \       l o   Jeffrey Goggin
   /__l l l / l l l  l l l / l l   * * * * * * *
  /   l l_l \_l l l__/ l_l \_l l   AudiDudi@delphi.com