[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]


In message <9609092000.AA31299@hunch.zk3.dec.com> Andrew Duane USG/PE writes:

> NA 10V engines are non-interference. Turbo 10V engines are interference,
> and will bend things that oughtn't be bent.
> NA 20V are intererference, too, so I suspect are 20V turbos.

An engineer who knows tells me the 10V turbo MB engine is non-interference when 
turned by hand, but interference at high revs.

Of course, belts don't go when engines are being turned by hand.

 Phil Payne
 Committee Member, UK Audi [ur-]quattro Owners Club