[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
20v blown manifold gasket
The Gods strike!
Shortly after replacing a gasket and some PITA spring loaded bolts down by
the cat, part of my manifold gasket seal blew out. Now my snowmachine
sounds like a winter beater (put, put, put).
The seals are cheap. Six seals for $25 bucks!. Here's the killer: 3.2 hours
of shop labor ($60/hour)!!!!!!! Yikes.
I was wondering has anybody pulled the cast header off a 90q-20v, could you
outline what needs to come out. From the looks of it, there is a heat
stove....looks tight....and maybe the airbox too. Is it worth it to do it
Any help appreciated
Michael Benno 90q-20v