[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Ping under full boost solved
Hey Paul, Hope your feeling better. I have some info on my boost
situation. First I installed the resister and ran with just the spring. It
seemed faster with my hack but i could be wrong.
Next the knob using the vacume steps to compensate for hose diameter diff.
this time i uncluded the presure gague. Much faster but the ping was still
there. However, the boost gague was reading 18 psi peak. So I turned the
Knob all the way down untill it stopped turning and worked my way up from
the bottom. after a few runs it seemed that 15-16 psi worked without any
Ping. so thats where it sits. the Charlie spring must be doing more than
I welcome your comments,
Bob Russell 89 200q
American Exterminating co.
Springfield, Ma. 800-5-INSECT
New England's only 4th generation pest management firm