[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

no clutch!

In message <199703241738.MAA19661@mailrelay.tiac.net> "Mike Des Chenes" writes:

> Funny, my pedal comes back up after I press it down but it feels like
> there is
> no resistance. I've checked both the master and slave cylinders (even
> pulled the
> slave out of the tranny) . No leaks! Would I see fluid if the seals were
> bad? I just 
> hope that it's not the clutch lever or release bearing! When my wife gets
> home I'll 
> have her depress the clutch pedal and see if the slave moves.

It sounds like it needs bleeding.  Note that the master cylinder piston has to 
travel _all_the_way_ to the end of the cylinder on each sweep. 

 Phil Payne
 Committee Member, UK Audi [ur-]quattro Owners Club