[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: WOT/Idle Switch Assembly


I want to check my WOT/Idle switch assembly. The thing looks sealed
closed. Does that black plastic cover clip off easily to expose
the switches within? I pulled the throttle back off idle, there is a
satisfying "click" as I hear the switch leave idle position, but no
satisfying "click" is  heard when the throttle gets to full (1/2 or
2/3 or over) position. Should this be like that? Just want to know
what people normally use to pull the cap of this thing, I don't want
to stick screwdrivers into the clips only to successfully pop one of
them off for good. :)

"a thousand miles from here, there is another person smiling"
1990 Turbo (200T)
name   : gerard van vught
tel    : +27-57-912 2658 (w) / 082 923 9609 (cell)
url    : http://www.acenet.co.za/homepages/gerard/
e-mail : gerard@poboxes.com  / han.solo@galaxycorp.com
         gerard@acenet.co.za / van_vught@frg.issi.co.za