[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: One electrode... three electrode
> >Okay folks... in my '87 QSW, with the Audi 5 cylinder, what plugs should
> >I be using? Does the NA 5 cylinder take the triple electrode plugs, or
> >basic, single electrode plugs?
> I use Accel 113. They are non-resistor, got them at PepBoys, but they had
> to special order them.
Non-resistors will give you ignition noise on the radio. Get the regular
resistored Cu Bosch, I use the colder fours or fives. The OEM seven is
too hot a plug.
Triple electrodes were designed with the lazy people in mind. They last
3 times as long between the changes.
They say NGK are pretty good, but I have no opinion of my own.
'89 200TQ -- 18psi (TAP)
'98 A4TQ -- on an 18-wheeler