[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Rust tips
> My procedure so far - use _small_ wire brush (appx 7mm in diameter) to
> scrape off rust, (accidentally getting some of the surrounding paint) apply
> some primer, sand a little, paint with car color, sand & polish, then apply
> clearcoat. Poliish if neccesary.
My understanding is that even for a tiny speck of rust you have to take
a *large* area down to clean shiny metal. The rust extends into the
sheet metal, down and around, if you don't really get it all your work
If you want to work the street alone,
I'll disappear for you...
I'm your man. (Leonard Cohen)
- Rust tips
- From: Brooks Ellis <firstname.lastname@example.org>