[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Fuel gauge problems
> Checking to see if anyone has any BTDT with the fuel gauge not working
> properly after the fuel pump has been changed in the 5k cars in spite of
> very careful when removing and reinstalling the sender unit.
Replaced fuel pump in '90 100 a few weekends ago. Don't know whether
the sending units are the same, but while I had mine out, I cleaned up
the contacts (both the graduated lines on the receiver end as well as
the contact point) with a pencil eraser. My guage was not
malfunctioning up to then to my knowlege; but it looked very
straightforward (float, arm, contacts, wires and head).