[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
fault code readings
Got the LED working.
I was getting a readout of four long blinks with a long pause in between each
blink. Then I cleared out the memory by removing fuse #21 and retested. Now,
I'm getting a long blink, then a long pause, then 4 quick blinks in a row,
long pause, 4 quick blinks...
I think that means #1111, which is a bad ECU. Figures it would have to show
I have an 89 200T, with the dual knock sensors and (supposedly) the MAC14 ECU.
Am I misreading the codes?