[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: RF CV Boot job questions (5ktq)

In message <0c1ca0024220298UPIMSSMTPUSR05@email.msn.com> "Ian J Haseltine" writes:

> Mine are SKF too. The axle nut was so tight that I could only just start the
> threads by hand. Just winding the nut on took so much effort that I was sure
> that I'd crossed it. After 4 turns I gave up and refitted the old nut. Some
> day when I'm feeling energetic I'll have another go.

It's meant to be tight - it's self-locking.  Check it out very carefully
and you'll find it's actually slightly oval.

 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)