Re: Romoving trunk shocks '85 4kq

[Fourkguy@aol.com]

In a message dated 10/1/98 3:00:53 AM Eastern Daylight Time, epicfoto@lava.net
writes:

<< There has to be an easier way...  if somebody
 knows of one, please let me know  :-) >>

It's really not that hard. There is a clip that goes around the circumference
of the shock at both ends. Looks like a sheet metal band that goes 90 percent
around. If you can get a good look at it at either end, the job is pretty
easy. Just get a screwdriver under an open end of the clip and pry it off. The
shock will completely remove its grip once this clip is removed. To put on the
new shock, you don't have to remove the clip, just snap it on.

Good Luck, 

Jeff