[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Found a source for 11/16" drag link for pump caps

To follow this up, it turns out that this drag link socket is still not
a perfect fit for the hydraulic pump. It needed a little Dremel
modification. Oh well.

- Wallace
  '87 5kcstq 150k

> >"5244 is the Proto part number for that 11/16" drag link socket, 3/8"
> >drive. I found a place in town that has them, so I'm going to get one
> >and a 3/8" hand impact driver."