[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: typ44TQ brake question
In message <email@example.com> JordanVw@aol.com writes:
> oh, i forgot to add, the front pads are new.
Try putting the connector back on one side, and bridging the contacts
on the other. If that doesn't put the light out, try it the other way
round. Then try bridging both sets of contacts and test the wires in
the brake pads for continuity. It's somewhere down there - breaks are
not uncommon in this circuit and you need 100% continuity round the
system to put the light out.
UK Audi quattro Owners Club
Phone: 0385 302803 Fax: 0870 0883933