[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: warm air intake hose

If this is the non turbo quattro, there is indeed a metal plate that bolts
to the exhaust manifold support bolts. It's been so long since I've seen
(and worked on the em) on a non turbo that I can't even remember right. If
you can acquire a Haynes 84-88 5000 manual, the em removal section has a
good picture of your manifold with the "plate". It should be a pretty sad
and rusty piece by now.

*Steve                                             Sachelle Babbar
*'87  5000CS Turbo 5spd 1.3-2.0 bar             <SBABBAR@IRIS.NYIT.EDU>
*Cockpit adjustable wastegate, AudiSport badge
*Disclaimer:"Any information contained herein is based purely on my own
*personal experience and may not necessarily reflect yours. Use caution as
*your results may vary from mine."

On Thu, 2 Dec 1999, Ron Wainwright wrote:

>   Hello listers, 
> I have a question for those of you who aren't
> discussing tire size that is standard on a T44,or
> those of you who aren't torn between which snow tire
> to use.
> The warm air intake hose on my 87 5ksq is dangling
> from my air mixture housing, it has a metal male piece
> that attaches to a thin piece of metal(thin like
> paper) that I guess was attached to my engine
> somewhere I am going to replace it but the Bentley is
> vaige the only picture I can see of it is on pg
> 25.38(Bentley Man 5ks,5kcs 84-88). My question is were
> does the warm air hose connect to is it bolted to the
> block or what. I crawled under their but really
> couldn't tell were it went. Any help be more than
> appreciated.
> Thank You
> Ron
> 87 5ksq 194k(original owner)
> 86 saab 9kcdt 126k(girlfriends)
> 91 V8q 5-spd wanted 
> __________________________________________________
> Do You Yahoo!?
> Thousands of Stores.  Millions of Products.  All in one place.
> Yahoo! Shopping: http://shopping.yahoo.com