[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Shims for '84 Quattro UR

Family pictures also confirms  that the thinnest is 3.00, this is for a Golf and will fit the WR engine, thanks for your help.


-----Original Message-----
From:	Jerry Croucher [mailto:croucher@eos.net]
Sent:	22 December 1999 14:19
To:	Iain Atkinson (ETL)
Cc:	'quattro@audifans.com'
Subject:	Re: Shims for '84 Quattro UR


Any good parts place should have what you need, this is
assuming that the shims are the same as the ones used in
4 cyl VW's.  I checked my box of spares & used shims
and 3.0 was the smallest I have.  BTW in the box was a
genuine VW/Audi shim at 3.1 that came out of my 1980
4000 (1.6 liter 4 cyl)


"Iain Atkinson (ETL)" wrote:

> Hi all
> Does anyone know of another source for shims for this engine, family pictures say 3.3 is the thinnest, and a friend of mine needs to go thinner than this. I seem to remember a while back this year someone saying that Fiat shims work??? Either reply here or at home @ iain.atkinson@tesco.net <mailto:iain.atkinson@tesco.net>
> Iain