[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 86 Audi ABS will not stay engaged

>My cousin and I have the same problem on both of our '87 5kcst since struts 
>were changed and ABS sensors R&R.  The ABS stays off all of the time.  So 
>do you adjust the ABS sensor?  I assume it's a magnetic pickup so the 
>orientation of the magnet in relation to the direction of rotation of the 
>wheel is important?

It's a depth problem.  Go to your dealer and get the little plastic 
tip's, Jack up the car, remove the sensors (After you remove the wheels) 
replace the tip's, SHOVE them sensors as far as they will go and tighten 
them down.  That should do it.


Eric Fletcher

STEADI RIC@aol.com