[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
re: '91 200q wastegate frequency valve prob. second day
I tested the resistance of the WGFV, and it's slightly out of spec.
Spec: 25 to 35 ohms. Reading: 23 ohms. Is there a way to check my
to see if it is indeed accurate?
I also did the basic check on all the fuses; none blown. It says to check
fuses 24 and 28; I can't figure out which ones they are.
Seemed to run a bit better today; I'll give it a couple days, then reassess.
Also: How do I clear out the memory of the fault codes so that I can see if
this keeps happening?