[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Confused in Isham
Trying to install a stock cruise control in the 100TQW.
The harness I have is from a slushbox car - so it has the clutch pedal
connector jumpered. It's going into a manual car, so I want to fit
a clutch switch to stop over-revving if I depress the clutch with
But there's _nowhere_ to install the switch. I realise that RHD Type
44s are rare on the list - but any ideas?
Family Pictures clearly shows two switches fitting into the pedal
frame. My pedal frame has a space for the switch below the brake
pedal switch, but there is absolutely nothing that would hold a switch
close to the clutch lever.
UK Audi quattro Owners Club
Phone: 07785 302803 Fax: 0870 0883933