[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

driveshaft carrier lubrication

While I was poking around under my car I made an attempt at greasing up
the carrier bearing (the one with the grease fitting at the Universal
Joint), and I had a heck of a time trying to rig up a contraption of hoses
to my grease gun to get grease in there.  I ended up giving up after
getting very little, if any, grease in there.  Is there anything out there
that lets you screw a fitting into the end of the grease gun like a
tapered hose fitting that would let me attach a hose that is a diameter
small enough to fit over the nipple on the Universal Joint?  I checked my
FLAPS, but couldn't find anything...


Marc Swanson


87 4kcsq  awaiting turbo
87 5ktq   donor (Parting out)