[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: rear axle alignment
Hiok-Tiaq Ng writes:
> I was just wondering about rear alignment
> specs for my 86 GT coupe. The Bentley
> manual says that the rear axle is not
> adjustable, but provides the limits for
> the camber and difference in toe for the
> left and right wheels. What am I supposed
> to do if they are off of these specs?
Although there are no adjustment points, if your camber and or toe
is off spec you can remove the stub axles from the rear suspension
beam and reinstall them with shims to compensate. This shouldn't
normally be necessary unless something is bent.
/// Ti Kan vorsprung durch technik
/// AMB Research Laboratories, Sunnyvale, CA. USA