[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: squirrels in my blower motor

>Well, sounds like it :).  I imagine a shot of graphite lube in the 
>right place will cure it.  Any suggestions or experiences?
>(this is on a 1988 90).
>| Dan |
>Dan Simoes			          dans@ans.net

My 1988 90Q has the same squirrel.  Remove the glove box, and you can remove
the blower from under the dash.  I did this about a year ago, and it has
started again, so I will be doing this shortly.  I think you can get at
bearings (sleeves) on vboth sides of the blower, if you remove it.  Removing
the blower requires removal of about 6 screws, and it pops out.

Allan Morris