[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: rebuilding an MC ,Dialynx EM and Racewares #

> Date:          Mon, 30 Mar 1998 06:41:14 GMT0BST1,M3.4.0/02:00,M10.4.0/
> From:          quk@isham-research.demon.co.uk (Phil Payne)
> Reply-to:      quk@isham-research.demon.co.uk
> To:            clark@rmi.net
> Cc:            quattro@coimbra.ans.net
> Subject:       rebuilding an MC ,Dialynx EM and Racewares #

Phil wrote:

> Aelred told me at last year's AGM that the first series of manifolds he cast 
> warped because the casting was too thin opposite #5.  John Robinson had two - 
> both warped and he was not a happy bunny.  Aelred did the replacement free of 
> charge and finally refunded John's money without any hassles.
> I got one of the first manifolds produced after the redesign.  It's now done 
> around 30000 miles without problems.  Audi have cut the price of their 
> component almost in half since Aelred started shipping in earnest.

 Phil, thanks for the info. Unfortunately, this em was imported about 
1 1/2 years ago for a potential rebuild that never took place. Seeing as I
wanted either the two piece or a Dialynx to replace the stock one, I
chose Dialynx because I had access to it. I'm just wondering what will 
happen once I bolt it up as I presume this is an early model. What are the
differences? Can one tell just by looking at it? Thanks again,

Chad Clark