[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Monkey Lad business practices? (Re: Turbo/wastegate questions - K24, WG Spring etc.)

----- Original Message -----
From: Swann, Benjamin R. (BSWANN) <BSWANN@arinc.com>
> I got rough about $400 from Scott last Spring.  If I'd have know it would
> more like $200 I would have considered it.
> I may be a cheapskate with my AUDI(according to Click & Clack), but not
> cheap.
> Ben

    Likewise... _If_  Benjamin Swann was quoted $400, me $375, and Gary
Lewis $210, I am a pretty aggravated cheapskate... I would be really annoyed
to pay $400 for it and then find out that some other people got it for $210!
WTF!? Isn't that one of the things that happens to us at the monkeylad
garage when the car breaks down?

    Before this heats up, let me say that I can totally understand if you
want to give people you consider your friends a better rate, but you should
really make sure that you tell them to keep it a secret! Furthermore, you
should put up prices for your wares on the site; It would keep these types
of things from happening.

    Alternately, if you are just generally gouging people for whatever you
think they can afford, I say that you are practicing bad business and it is
only a matter of time before your golden goose runs out. $375 is enough
money that those of us that cannot really afford to pay for it will come up
with another way to accomplish the effect, and if that includes writing our
own eeprom and possibly selling it to recoup some of the time and expense,
then so be it. I'm beginning to feel a sense of deja vu... Wasn't the QLCC
affair about more or less this same issue? Weren't you on the cheapskate
team then?

    It sure would be good to hear about a christmas sale where we could get
some of these from you at some kind of reduced rate... $375 is too much.
Here is where you (or any of the other _even_higher_priced_ chip modders)
could explain how the cost is justified. All I can picture happening is a
quick desoldering, attaching the socket, and inserting the already burned
chip. Then stick it in the mail. It doesn't have to cost $375-$550 to profit
adequately from this.


> -----Original Message-----
> From: Lewis, Gary M [mailto:Gary.Lewis@West.Boeing.com]
> Sent: Wednesday, November 24, 1999 6:42 PM
> To: 'quattro@audifans.com'; Swann, Benjamin R. (BSWANN)
> Subject: RE: Turbo/wastegate questions - K24, WG Spring etc.
> You know folks, Scott Mo.'s 86 - 88 chip and spring upgrade is only like
> was) $210 bux installed.  It is THE best money I've ever spent on a
> automotive mod.  No new turbo necessary, and it is done right, like the
> Factory would do (or maybe not depending on your opinion of Audi...)

> My .02
> Gary M. Lewis
> 1990 200tqa Silver/Platinum 146km 1.8 bar P6000 SVR, Bilsteins, BPV
> 1986 5kcstqa Sapphire/Platinum 180km Stock
> > My apologies to those who sell the mod kits by the way, as I'm sure they
> > are
> > worth it.  Some of us just can't afford or justify expensive chips, new
> > turbos and the like.  I'm not a racer, don't have the money or time -
> > maybe
> > some day.  Just want to get the best performance available without
> > spending
> > more than the car is actually worth.   I learn from the expert advice on
> > this list and other sources, and then I'll apply what I've learned if
> > prudent as a home mechanic/hobbyist.
> >
> > Thanks again for all the replies - keep 'em coming.  Happy Thanksgiving!
> >
> > Cheers,
> >
> > Ben Swann
> > '85 4KSQ
> > '86 5KCSQT
> > '87 5KCSQT Wagon
> >