[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 83 Ur-Q - No Spark

> This is the good news.  The bad news is that everything they have
tested =
> so far appears fine other than one of the Reference sensors.  I have =
> also suggested that they check the current input "15" at the back of
the =
> fuse box which has given problems before.
You need both the reference sensors working to get the ur-q going. One
is the reference mark sensor and on the ur-q flywheel marks approx 60
degree BTDC and the ECU uses this guy the begin the timing/spark cycle.
The other counts flywheel teeth so it knows where it is relative to the
ref mark sensor. 

Dave Lawson